SKL SKP

The SKL and SKP filter capsule series offers the most extensive range of filter capsule configurations on the market, with five sizes and 24 connection types to choose from.

The SKL and SKP series housings are manufactured using polypropylene, with the option of black PP for use with UV-sensitive products.

SKL and SKP filters are manufactured according to the modular principle.

You can configure your ideal filter capsule by selecting the material, length, filter medium, pore size, and inlet and outlet connections (which can differ). This approach is the most effective way to ensure you get the most efficient capsule filter for your application, product or system. We invite you to explore the vast array of possibilities we have to offer.

Our company supplies SKL SKP filters for use in the following sectors: coatings, inks, chemicals, mechanical engineering, laboratories, pharmaceuticals and medical technology.

Should you have any requirements or configurations, please do not hesitate to contact us. We would be delighted to provide further advice and samples upon request. Manufactured by Saint-Gobain.

Pore size: 0.1 to 200 microns

Filter area in cm² : 500 to 4000

Recommended flow rate for water (1 cP):

Pore size < 2 µm: 0.7 to 6 l/min

Pore size > 40 µm: up to 12 l/min

Outer diameter: 68 mm

Maximum pressure at 20°C: 5.5 bar

Materials:

Housing: Polypropylene

Filter media: Polypropylene melt-blown, Glass fiber (GF), Nylon membrane, Nylon melt-blown, PES membrane, PTFE membrane

Connections:

1H = 1/8" hose barb

1N = 1/8" NPT male thread

1NF = 1/8" NPT female thread

2HS = 1/4”-3/8” hose barb

2H = 1/4-1/2" hose barb

3H = 3/8" hose barb

2N = 1/4" NPT male thread

2NF = 1/4" NPT female thread

3NF = 3/8" NPT female thread

1Q = 1/8" quick fitting (suitable for CPC PMC / Linktech 20 Series)

2Q = 1/4" quick fitting (suitable for CPC PLC / Linktech 40 Series)

2QV = 1/4" quick fitting, self-closing (suitable for CPC PLC / Linktech 40 Series)

2QF = 1/4" quick connector (suitable for CPC PLC / Linktech 40 Series)

2QFV = 1/4" quick connector, self-closing (suitable for CPC PLC / Linktech 40 Series)

2QP = 1/4" quick fitting (suitable for CPC APC / Linktech 50 Series)

4Q = 1/2" quick fitting (suitable for CPC HFC / Linktech 65 Series)

MT = 1/2" Tri-Clamp (clamp 34 mm)

TC = 1.5" Tri-Clamp (clamp 50.5 mm)

LF = Female Luer lock

2C = 1/4" or 6mm hose compression fitting

8C = 5/16" (7.93mm) hose compression fitting

3C = 10 mm hose compression fitting

4C = 1/2" or 12 mm hose compression fitting