MKL

The MKL capsule filter has a throughput range of approximately 1 liter per minute. The MKL capsule filter is a particularly interesting option due to the wide range of 21 connection types, filter media and pore sizes available.

MKL filter capsules are manufactured according to a modular principle, allowing you to configure your capsule filter by selecting the material, filter medium, pore size, and inlet and outlet connections (which can differ). We believe this is the best way to ensure you select the right filter for your application.

Our company delivers MKL filters for use in a variety of applications, including inks and chemicals, mechanical engineering, laboratories, the pharmaceutical industry, and the medical technology sector.

Should you have any requirements or configuration requests, please do not hesitate to contact us. Should you require a proposal for an MKL capsule, we would be delighted to provide one. Manufactured by Saint-Gobain.

Pore size: 0.1 to 70 microns

Filter area in cm^²: 200 to 500

Recommended flow rate for water (1 cP):

Pore size < 2 µm: 600 to 1300 ml/min

Pore size > 40 µm: 2600 ml/min

Outer diameter: 59 mm

Maximum pressure at 20°C: 5.5 bar

Materials:

Housing: Polypropylene

Filter media: Polypropylene melt-blown, Glass fiber (GF), Nylon membrane, Nylon melt-blown, PES membrane, PTFE membrane

Connections:

1H = 1/8" hose barb

2H = 1/4" hose barb

3H = 3/8" hose barb

5H = 9/16" hose barb

2N = 1/4" NPT male thread

3NF = 3/8" NPT female thread

1Q = 1/8" quick fitting (suitable for CPC PMC / Linktech 20 Series)

1QE = 1/8" quick fitting, 90° angle (suitable for CPC PMC / Linktech 20 Series)

1QF = 1/8" quick coupling (suitable for CPC PMC / Linktech 20 Series)

1QFV = 1/8" quick coupling, self-closing (suitable for CPC PMC / Linktech 20 Series)

2Q = 1/4" quick fitting (suitable for CPC PLC / Linktech 40 Series)

2QE = 1/4" quick fitting, 90° angle (suitable for CPC PLC / Linktech 40 Series)

2QF = 1/4" quick connector (suitable for CPC PLC / Linktech 40 Series)

2QFV = 1/4" quick connector, self-closing (suitable for CPC PLC / Linktech 40 Series)

2QP = 1/4" quick fitting (suitable for CPC APC / Linktech 50 Series)

2N = 1/4" NPT male thread

2C = 1/4" or 6mm hose compression fitting

MT = 1/2" Tri-Clamp (clamp connection 34 mm)

LM = male Luer lock

LF = Female Luer-Lock

LFE = female Luer-Lock 90° angle